FS-1030D Service Manual - kyocera
FS-1030D Service Manual - kyocera
FS-1030D Service Manual - kyocera
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2G6<br />
Load paper.<br />
1. Pull the cassette out of the printer.<br />
2. Set the paper in the cassette.<br />
Cassette<br />
Initializing the printer and make test print (status page).<br />
Figure 1-3-12<br />
1. Turn on the printer's power switch. Upon turning<br />
on the power, the printer's 4 indicators flash in<br />
sequence until printer initialization is complete,<br />
then the indicator [on line] lights steadily.<br />
2. The printer can print two different types of status<br />
page standard and service-purpose. A servicepurpose<br />
status page contains more detailed<br />
information about printer settings than a standard<br />
status page.<br />
To print a standard status page, press<br />
the GO key for at least 3 seconds and<br />
the indicators light in sequence from<br />
top to bottom.<br />
To print a service-purpose status<br />
page, press the GO key for more than<br />
10 seconds and the indicators light in<br />
sequence twice from top to bottom.<br />
Power switch<br />
GO key<br />
Figure 1-3-13<br />
1-3-7