FS-1030D Service Manual - kyocera
FS-1030D Service Manual - kyocera
FS-1030D Service Manual - kyocera
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2G6<br />
Problem Causes Check procedures/corrective measures<br />
(13)<br />
A paper jam in the<br />
paper feed or exit<br />
section is indicated<br />
when the power<br />
switch is turned on.<br />
(14)<br />
The LED indicator<br />
requesting cover to<br />
be closed is displayed<br />
when the<br />
front cover is<br />
closed.<br />
A piece of paper torn from<br />
copy paper is caught<br />
around registration sensor<br />
or exit sensor.<br />
Defective registration sensor.<br />
Defective exit sensor.<br />
Poor contact in the connector<br />
terminals of interlock<br />
switch.<br />
Defective interlock switch.<br />
Check and remove if any.<br />
Replace registration sensor if indication of the corresponding<br />
sensor is not light.<br />
Replace exit sensor if indication of the corresponding sensor is<br />
not light.<br />
Reinsert the connector. Also check for continuity within the connector<br />
cable. If none, remedy or replace the cable.<br />
Check for continuity across switch. If there is no continuity when<br />
the switch is on, replace it.<br />
(15)<br />
Others.<br />
Wiring is broken, shorted<br />
or makes poor contact.<br />
Noise.<br />
Check for continuity. If none, repair.<br />
Locate the source of noise and remove.<br />
1-5-20