FS-1030D Service Manual - kyocera
FS-1030D Service Manual - kyocera
FS-1030D Service Manual - kyocera
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2G6<br />
(9) Black dots appear<br />
on the image.<br />
Causes<br />
1. Dirty or flawed drum.<br />
2. Dirty contact glass.<br />
3. Deformed or worn cleaning blade.<br />
Causes<br />
1. Dirty or flawed drum.<br />
2. Dirty contact glass.<br />
3. Deformed or worn cleaning blade.<br />
Check procedures/corrective measures<br />
Replace the process unit.<br />
Clean the contact glass.<br />
Replace the process unit.<br />
(10)Image is blurred.<br />
Causes<br />
1. Deformed press roller.<br />
2. Paper conveying section drive problem.<br />
Causes<br />
1. Deformed press roller.<br />
2. Paper conveying section drive problem.<br />
Check procedures/corrective measures<br />
Replace the press roller (see page 1-6-27).<br />
Check the gears and belts and, if necessary, grease them.<br />
(11)Paper creases.<br />
Causes<br />
1. Paper curled.<br />
2. Paper damp.<br />
Causes<br />
Check procedures/corrective measures<br />
1. Paper curled. Check the paper storage conditions.<br />
2. Paper damp. Check the paper storage conditions.<br />
1-5-16