FS-1030D Service Manual - kyocera
FS-1030D Service Manual - kyocera
FS-1030D Service Manual - kyocera
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2G6<br />
1-6-11 Removing the main charger unit<br />
1. Remove the process unit from the printer (See page 1-6-2).<br />
2. Unlatch the three snaps, and remove the main charger cap.<br />
3. Draw the main charger unit in the direction of arrow (A), then pull it out in the direction of arrow (B).<br />
Main charger unit<br />
(B)<br />
(A)<br />
Snap<br />
(C)<br />
Snaps<br />
Terminal<br />
Main charger cap<br />
Main charger<br />
unit<br />
Figure 1-6-32 Removing the main charger unit<br />
CAUTION<br />
When refitting the main charger unit, hold terminal down (C), then push frontwards. Use care not to deform the terminal.<br />
1-6-31