FS-1030D Service Manual - kyocera

2G6
Service items
Printing an event log
(EVENT LOG)
Description
Description
Prints a history list of occurences of paper jam, self-diagnostics, toner replacements, etc.
Purpose
Analyze the failure by determining the cause depending on the history of occurrence.
Procedure
1. Connect the USB or parallel cable between printer and PC.
2. Turn printer power on. Make sure the printer is ready.
3. At the DOS prompt, send the following command to the printer:
echo !R! ELOG;EXIT;>prn
Event log will be printed.
(g)
[EB20MA001/2G6_1000.001.019][C2][40.00SFLB][01] Firmware version: 2G6_30000.001.024 Released: 15/Jul/2005
Total page 12345 DN:SPL0000000 SN:SPL0000000
# Count. Event # Count. Service Code
8 9993 10.48.01.88.01.01
8 11234 01.6000
7 9992 10.48.01.88.01.01
7 10000 01.6000
6 9991 10.48.01.88.01.01
6 9999 01.6000
5 9998 01.6000
5 9990 10.48.01.88.01.01
4 9997 01.6000
4 9989 10.48.01.88.01.01
3 9996 01.6000
3 9979 10.48.01.88.01.01
2 9995 01.6000
2 9969 10.48.01.88.01.01
1 9994 01.6000
1 1 10.48.01.88.01.01
10.48.01.88.01.01
(a) (b) (c) (d) (e) (f)
# Count. item
8 11234 02.00
7 10000 02.00
6 9999 02.00
5 9998 02.00
4 9997 02.00
3 9996 02.00
2 9995 02.00
1 9994 02.00
J00: 0 J43: 0 C:6000: 4 (i) T00: 1
(h)
J05: 0 J44: 0 C:6050: 1
J09: 0 J46:
J10: 0 J47:
J11: 0 J50:
J12: 0 J51:
J13: 0 J52:
J14: 0 J53:
J15: 0 J60:
J16: 0 J61:
J23: 0 J86:
J30: 0 J87:
J35: 0 J88:
J40: 0 J89:
J41:
J42:
Figure 1-4-3 Event log (EVENT LOG)
1-4-5