FS-1030D Service Manual - kyocera
FS-1030D Service Manual - kyocera
FS-1030D Service Manual - kyocera
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2G6<br />
1-6-6 Removing the transfer roller<br />
CAUTION<br />
Do not touch the transfer roller (sponge) surface. Oil and dust (particles of paper, etc.) on the transfer roller can<br />
significantly deteriorate the print quality (white spots, etc.).<br />
When refitting the bushes and springs, make sure to refit the black colored bush and spring on the left side. Also,<br />
observe the correct direction to which the bush is fit in reference to the paper passing direction.<br />
1. Remove the process unit (See page 1-6-2).<br />
2. Remove the transfer roller from the both bushes.<br />
Paper passing direction<br />
Gear<br />
Wide<br />
Narrow<br />
Transfer roller<br />
Bush<br />
Bush<br />
(Black colored)<br />
Spring<br />
(Black colored)<br />
Transfer roller<br />
Bush<br />
Spring<br />
Transfer roller<br />
Figure 1-6-9 Removing the transfer roller<br />
1-6-8