FS-1030D Service Manual - kyocera
FS-1030D Service Manual - kyocera
FS-1030D Service Manual - kyocera
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2G6<br />
1-7-1 Upgrading the firmware on the main PWB<br />
Updating the system (controller) firmware is possible by downloading the firmware through the parallel interface or through<br />
the memory card (CompactFlash). These firmware programs are directly overwritten in the system DIMM (Flash ROM type<br />
only) on the main PWB. The operation panel message in different languages can also be downloaded through the parallel<br />
interface or through the memory card.<br />
(1) Firmware program data format<br />
System firmware<br />
The data to be downloaded are supplied in the following format:<br />
S2G6_3000001021.cmp<br />
Software ID<br />
Product code 2G6: This printer<br />
Pause (period)<br />
Compression<br />
Pause (under bar)<br />
Build number<br />
Version up history<br />
Destination<br />
0: Normal<br />
E: Corrective<br />
Firmware description (supplement)<br />
Firmware description 1: Engine controller<br />
2: MFP controller<br />
3: Printer (Main) controller<br />
4: Facsimile<br />
5: NIC<br />
6: Operation panel message language<br />
7: Panel language<br />
Figure 1-7-1 Firmware program data format<br />
1-7-1