FS-1030D Service Manual - kyocera
FS-1030D Service Manual - kyocera
FS-1030D Service Manual - kyocera
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2G6<br />
(5) Removing the thermal cutout<br />
CAUTION<br />
Do not bend the terminals of the thermal cutout.<br />
1. Remove and split the fuser unit (See page 1-6-19).<br />
2. Remove the heater lamp (See page 1-6-22).<br />
3. Remove the heat roller (See page 1-6-23).<br />
4. Remove the two screws.<br />
5. Remove the thermal cutout.<br />
Screws<br />
Thermal cutout<br />
Figure 1-6-27 Removing the thermal cutout<br />
1-6-26