FS-1030D Service Manual - kyocera
FS-1030D Service Manual - kyocera
FS-1030D Service Manual - kyocera
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2G6<br />
(3) Removing the heat roller<br />
WARNING<br />
The heat roller is extremely hot immediately after the printer was running. Allow substantial period of time until it cools<br />
down.<br />
1. Remove and split the fuser unit (See page 1-6-19).<br />
2. Remove the heater lamp (See previous page).<br />
3. Press the lamp A holder away from the heat roller. Pull up both heat R bush and heat L bush at the same time.<br />
Heat L bush<br />
Heat roller<br />
Heat R bush<br />
Figure 1-6-24 Removing the heat R bush and heat L bush<br />
1-6-23