Intel Server Board S1200BT - PROconsult Data A/S

Intel® Server Board S1200BT TPS
Connector/Header Locations and Pin-outs
Table 30. RJ-45 10/100/1000 NIC Connector Pin-out (J6A1)
Pin Signal Name Pin Signal Name
1 P5V_USB_PWR75 2 USB_PCH_11_FB_DN
3 USB_PCH_11_FB_DP 4 GND
5 P5V_USB_PWR75 6 USB_PCH_10_FB_DN
7 USB_PCH_10_FB_DP 8 GND
9 P1V8_PHY_VCT_R 10 NIC1_MDIP
11 NIC1_MDIN 12 NIC1_MDIP
13 NIC1_MDIN 14 NIC2_MDIP
15 NIC1_MDIN 16 NIC2_MDIP
17 NIC1_MDIN 18 GND
19 LED_NIC1_LINK_ACT_0_R 20 P3V3_AUX
21 LED_NIC1_2 22 LED_NIC1_LINK1000_1
7.5.3 SATA
The sever board provides up to two 6Gb/s SATA connectors and four 3Gb/s SATA connectors.
The pin configuration for each connector is identical and defined in the following table:
7.5.4 SAS Connectors
Table 31. 6Gb/s SATA Connector Pin-Out
Pin
Signal Name
1 GND
2 SATA_TX_P
3 SATA_TX_N
4 GND
5 SATA_RX_N
6 SATA_RX_P
7 GND
Table 32. 3Gb/s SATA Connector Pin-out
Pin Signal Name Description
1 GND Ground
2 SATA/SAS_TX_P_C Positive side of transmit differential pair
3 SATA/SAS_TX_N_C Negative side of transmit differential pair
4 GND Ground
5 SATA/SAS_RX_N_C Negative side of receive differential pair
6 SATA/SAS_RX_P_C Positive side of receive differential pair
7 GND Ground
The Intel ® Server Board S1200BTL provides one SAS connector.
The pin configuration is identical and defined in the following table:
Revision 1.0
Intel order number G13326-003
97