Intel Server Board S1200BT - PROconsult Data A/S

Intel® Server Board S1200BT TPS
Jumper Blocks
Figure 47. Jumper Blocks (J2G1, J1G1, J1H3, and J2J1) on S1200BTS
Table 43. Server Board Jumpers (J2G1, J1G1, J1H3, and J2J1) on S1200BTS
Jumper Name Pins System Results
J1H3: CMOS
Clear
J1J2: ME Force
Update
J1G1:
Password Clear
J2G1: BIOS
Recovery
1-2 These pins should have a jumper in place for normal system operation. (Default)
2-3 If these pins are jumpered with AC power plugged, the CMOS settings are cleared within
five seconds. These pins should not be jumpered for normal operation.
1-2 ME Firmware Force Update Mode – Disabled (Default)
2-3 ME Firmware Force Update Mode – Enabled
1-2 These pins should have a jumper in place for normal system operation. (Default)
2-3 If these pins are jumpered, administrator and user passwords are cleared within 5-10
seconds after the system is powered on. These pins should not be jumpered for normal
operation.
1-2 These pins should have a jumper in place for normal system operation. (Default)
2-3 Given that the main system BIOS will not boot with these pins jumpered, system can only
boot from EFI-bootable recovery media with the recovery BIOS image.
8.1 CMOS Clear and Password Reset Usage Procedure
The CMOS Clear and Password Reset recovery features are designed such that the desired
operation can be achieved with minimal system downtime. The usage procedure for these two
Revision 1.0
Intel order number G13326-003
105