Raymarine ST6001 - Zanshin

More documents

Recommendations

Info

Chapter 7: Adjusting Autopilot Settings 81 Data pages 1-7 The next 7 screens allow you to modify the settings for the data pages. These define the SeaTalk/NMEA data pages that will be available during normal operation (see page 29). Each data page setup screen initially shows the title DATA PAGE and the page number. After 1 second, the text changes to the title of the data currently set for that page. The default settings are: Data page Default setting 1 XTE (Cross Track Error) 2 BTW* (Bearing to Waypoint) 3 DTW* (Distance to Waypoint) 4 RESPONSE 5 -7 NOT USED (These pages are not displayed when you scroll through the data pages during normal operation) *Note: It is good practice to keep the BTW and DTW pages for display. If the autopilot receives a man overboard (MOB) message, these data pages will show the bearing and distance to the MOB location. To change the data displayed on a data page: • Press disp to move to the appropriate data page setup screen. • Use the -1 and +1 keys to scroll forwards or backwards through the available data pages (see following table). • Then press disp to move to the next data page you want to change, or press and hold standby for 2 seconds to save changes. Available data pages Speed Knots Log Trip Average Speed, Knots Wind Direction Wind Speed Depth Metres* Depth Feet* Depth Fathoms* Displayed as SPEED KTS LOG XXXX.X TRIP XXX.X AV. SPD KTS e.g. WIND PORT WIND KTS DEPTH M DEPTH FT DEPTH FA 7 Adjusting Autopilot Settings
82 <strong>ST6001</strong>+ Autopilot Control Unit - Owner’s Handbook 7 Adjusting Autopilot Settings Available data pages Displayed as Heading HEADING Water Temperature, Degrees C* WATER °C Water Temperature, Degrees F* WATER °F Course Over Ground COG Speed Over Ground, Knots SOG KTS Cross Track Error XTE Distance to Waypoint DTW Bearing to Waypoint BTW Rudder Gain RUDD GAIN Response RESPONSE Watch WATCH - used to control the Watch timer (see page 30) Universal Time Coordinated UTC NOT USED Page not displayed (Any data page set to NOT USED is not displayed when you scroll through the data pages during normal operation) *NOTE: There are 3 depth pages (meters, feet and fathoms) and 2 water temperature pages (°C and °F). The <strong>ST6001</strong>+ will display the water temperature or depth data in the units defined by data page you select.
Page 1 and 2:
Distributed by Any reference to Ray
Page 3 and 4:
ii ST6001+ Autopilot Control Unit -
Page 5 and 6:
iv ST6001+ Autopilot Control Unit -
Page 7 and 8:
vi ST6001+ Autopilot Control Unit -
Page 9 and 10:
viii ST6001+ Autopilot Control Unit
Page 11 and 12:
x ST6001+ Autopilot Control Unit -
Page 13 and 14:
Part 1: Using the ST6001+
Page 15 and 16:
2 ST6001+ Autopilot Control Unit -
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44: 30 ST6001+ Autopilot Control Unit -
Page 45 and 46: 3 Advanced Operation 32 ST6001+ Aut
Page 53 and 54: 4 Fault Finding & Maintenance 40 ST
Page 55 and 56: Part 2: Installing the ST6001+
Page 67 and 68: 5 Installing the ST6001+ 54 ST6001+
Page 87 and 88: 6 Commissioning the Autopilot 74 ST
Page 93: 80 ST6001+ Autopilot Control Unit -
Page 113 and 114: 100 ST6001+ Autopilot Control Unit
Page 134: Control unit - flush mount template
Page 137: Factory Service Centers United Stat
show all

Raymarine ST6001 - Zanshin

Create successful ePaper yourself

Delete template?

Save as template?