07.11.2014 Views

New Products

New Products

New Products

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Type 2 Surge Arresters<br />

• High discharge capacity due to heavy-duty zinc<br />

oxide varistor<br />

• Quick response<br />

• High reliability due to "Thermo Dynamic<br />

Control" disconnector<br />

• Fault indication by red indicator flag in the<br />

inspection window<br />

• Specifically designed for high system voltages<br />

DEHNguard ® 1000 (FM)<br />

Compact single-pole surge arrester<br />

For protecting low voltage consumer’s installations against surges. For<br />

installation in conformity with the lightning protection zones concept at<br />

the boundaries from 0 B – 1 and higher.<br />

DEHNguard 1000:<br />

DEHNguard ... FM:<br />

Compact single-pole surge arrester with a rated voltage U C = 1000 V a.c.<br />

With remote signalling contact for monitoring device (floating changeover contact)<br />

With rated voltages up to 1000 V, the compact and powerful DEHNguard<br />

1000 (FM) single-pole surge arresters can be used for a wide range of<br />

applications.<br />

The DEHNguard family is not only characterised by its high degree of<br />

flexibility, but also by its distinctive performance parameters which set<br />

standards worldwide: The high discharge capacity, low voltage protection<br />

level and dual "Thermo Dynamic Control" monitoring and disconnection<br />

device stand for maximum reliability.<br />

The external design of the device reflects its field of application.<br />

DEHNguard 1000 (FM), with a width of two modules, entirely fulfils all<br />

mechanical requirements resulting from the high system voltages.<br />

Apart from the standard visual indication with green and red indicator<br />

flags, DEHNguard 1000 (FM) arresters feature a three-pole remote signalling<br />

terminal. With its floating changeover contact, the remote signal<br />

can be used as a break or make contact according to the particular circuit<br />

concept.<br />

Surge Arresters Type 2<br />

It is the DEHN-specific "Thermo Dynamic Control" disconnector that<br />

ensures that the arresters change into a safe, isolated state even in case of<br />

extreme overload. For this purpose, the surface temperature of the heavyduty<br />

varistor and the intensity of the discharge current is evaluated.<br />

Earthing brackets of type EB DG 1000 1 3 and EB 1 4 9 can be used to<br />

connect earth terminals of several DEHNguard 1000 (FM) surge arresters<br />

to earth.<br />

www.dehn.de<br />

113

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!