New Products

Accessory for Terminal Block Systems
Shield Connection on Anchor Bars
• Lightning-impulse-current-tested up to 10 kA
(10/350 μs)
• Corrosion-resistant stainless steel
• Spring element ensures permanent shield
connection
Lightning current carrying shield connection system for anchor bars.
A slipping spring element compensates the yield of the cable materials
used.
The lightning-impulse-current-tested shield connection system is specifically
used on anchor bars. As, in the course of time, the conductor materials
are subject to a yield, this yield is compensated by a slipping spring
element. The shield connection can also be isolated from local potential
by means of an adequate insulating element.
This very robust shield connection
system is particularly suited
for cables with medium-sized
diameters. It has been tested
with lightning currents and is
approved for nuclear plants.
Shield connection system on
anchor bar
www.dehn.de
333