New Products

DPL 10 G3
SPDs for LSA Technology
IN
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 0
9
41
111
22
25
OUT
• Powerful SPD block
• Types with/without fail-safe function or
visual indicator
• For installation in conformity with the
lightning protection zones concept at
the boundaries from 0 B – 1 and higher
Basic circuit diagram DPL 10 G3
Dimension drawing DPL 10 G3
SPD block for ten pairs with three-pole gas discharge tubes for almost all applications. FSD arresters
feature a fail-safe function and additional visual indication after the fail-safe feature has been activated.
Thus it can be immediately identified whether an arrester has to be replaced.
907 214
DPL 10 G3 110
907 216
DPL 10 G3 110 FSD
Type DPL 10 G3 110 DPL 10 G3 110 FSD
Part No. 907 214 907 216
SPD class B B
Fault indicator –– colour change
Nominal voltage (U N ) 110 V 110 V
Max. continuous operating d.c. voltage (U c ) 180 V 180 V
Max. continuous operating a.c. voltage (U c ) 127 V 127 V
Nominal current (I L ) 0.4 A 0.4 A
C2 Total nominal discharge current (8/20 μs) (I n ) 10 kA 10 kA
C2 Nominal discharge current (8/20 μs) per line (I n ) 5 kA 5 kA
Overstressed fault mode 10 kA (8/20): open line EN 61643-21: mode 3 10 kA (8/20 μs): open line EN 61643-21: mode 3
Impulse reset no backup fuse under nominal conditions no backup fuse under nominal conditions
Voltage protection level line-PG for I imp 10/350 μs D1 (U p ) ≤ 600 V ≤ 600 V
Voltage protection level line-line for I n C2 (U P ) ≤ 600 V ≤ 600 V
Voltage protection level line-PG for I n C2 (U p ) ≤ 600 V ≤ 600 V
Voltage protection level line-line for 1 kV/μs C3 (U p ) ≤ 600 V ≤ 600 V
Voltage protection level line-PG for 1 kV/μs (U p ) ≤ 600 V ≤ 600 V
Capacitance line-line (C) ≤ 5 pF ≤ 5 pF
Capacitance line-PG (C) ≤ 5 pF ≤ 5 pF
Fail-safe function –– gas discharge tube with spring contacts
Operating temperature range -40°C...+80°C -40°C...+80°C
Pluggable into LSA disconnection and terminal blocks (type 2) LSA disconnection and terminal blocks (type 2)
Earthing via mounting frame mounting frame
Enclosure material polyamide polyamide
Colour grey grey
Test standards IEC 61643-21 / EN 61643-21 IEC 61643-21 / EN 61643-21
DPL 10 G3 110
907 214
Überspannugsableiter DEHNrapid LSASchutzstecker für 10 Doppeladern
DPL 10 G3 110 FSD
907 216
Überspannugsableiter DEHNrapid LSASchutzblock für 10 Doppeladern failsafe
Accessory for DPL 10 G3
Gas Discharge Tube
High-capacity replacement gas discharge tubes for DPL
10 G3. Three-pole unit with common arc chamber for a
constant voltage protection level for line-line and lineground.
Type GDT 230 G3 GDT 230 G3 FSD
Part No. 907 208 907 217
Integrated into Part No. 907 214 907 216
Visual fault indicator –– 3
Fail-safe spring –– 3
907 208
GDT 230 G3
907 217
GDT 230 G3 FSD
GDT 230 G3
907 208
Gasentladungsableiter 230V fürDEHNrapid LSA
GDT 230 G3 FSD
907 217
Gasentladungsableiter 230V für DEHNrapid LSA mit fail-safe-Funktion
242 www.dehn.de