New Products

DEHNpatch
DPA M CAT6
SPDs for RJ Connection
56
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
7 29
L1
19
80
L2
9
• Ideally suited for retrofitting, protection
of all lines
• CAT 6A in the channel according to
ANSI/TIA/EIA-568
• Power over Ethernet
(PoE+ according to IEEE 802.3at)
• For installation in conformity with the
lightning protection zones concept at
the boundaries from 0 B – 2 and higher
Basic circuit diagram DPA M CAT6 RJ45
Dimension drawing DPA M CAT6 RJ45
Universal arrester for Industrial Ethernet, Power over Ethernet (PoE+ according to IEEE 802.3at up
to 57 V) and similar applications in structured cabling systems according to Cat. 6 and class E A up
to 500 MHz. Fully shielded type for DIN rail mounting.
Accessories: Earthing bracket with flat connector sleeve
Type DPA M CAT6 RJ45S 48 DPA M CAT6 RJ45H 48
Part No. 929 100 929 110
SPD class T T
Nominal voltage (U N ) 48 V 48 V
Max. continuous operating d.c. voltage (U c ) 48 V 48 V
Max. continuous operating a.c. voltage (U c ) 34 V 34 V
Max. continuous d.c. voltage pair-pair (PoE) (U c ) 57 V 57 V
Nominal current (I L ) 1 A 1 A
C2 Nominal discharge current (8/20 μs) line-line (I n ) 150 A 150 A
C2 Nominal discharge current (8/20 μs) line-PG (I n ) 2.5 kA 2.5 kA
C2 Total nominal discharge current (8/20 μs) line-PG (I n ) 10 kA 10 kA
C2 Nominal discharge current (8/20 μs) pair-pair (PoE) (I n ) 150 A 150 A
Voltage protection level line-line for I n C2 (U P ) ≤ 190 V ≤ 190 V
Voltage protection level line-PG for I n C2 (U P ) ≤ 600 V ≤ 600 V
Voltage protection level line-line for I n C2 (PoE) (U P ) ≤ 600 V ≤ 600 V
Voltage protection level line-line at 1 kV/μs C3 (U P ) ≤ 145 V ≤ 145 V
Voltage protection level line-PG at 1 kV/μs C3 (U P ) ≤ 500 V ≤ 500 V
Voltage protection level pair-pair at 1 kV/μs C3 (PoE) (U P ) ≤ 600 V ≤ 600 V
Insertion loss at 250 MHz ≤ 2 dB ≤ 3 dB
Capacitance line-line (C) ≤ 165 pF ≤ 250 pF
Capacitance line-PG (C) ≤ 255 pF ≤ 400 pF
Operating temperature range -20°C ...+60°C -20°C ...+60°C
Degree of protection IP 20 IP 20
For mounting on 35 mm DIN rails acc. to EN 60715 35 mm DINs rail acc. to EN 60715
Connection (input/output) RJ45 connecting lead / RJ45 connecting lead RJ45 connecting lead / RJ45 connecting lead
Pinning 1/2, 3/6, 4/5, 7/8 1/2, 3/6, 4/5, 7/8
Connecting lead A = approx. 0.5 m, G = approx. 3 m * ) A = approx. 1 m, G = approx. 5 m * )
Connector Stewart 39 series Hirose TM 21P
Earthing via 35 mm DIN rail acc. to EN 60715 35 mm DIN rail acc. to EN 60715
Enclosure material zinc die casting zinc die casting
Colour bare surface bare surface
Test standards IEC 61643-21 / EN 61643-21 IEC 61643-21 / EN 61643-21
Transmission class according to ISO/IEC 11801 Cat. 6 Cat. 6
Transmission class according to EN 50173-1 Class E A Class E A
Transmission class according to ANSI/TIA/EIA-568 Cat. 6A in the channel Cat. 6A in the channel
Approvals GHMT, GOST GHMT, GOST
Accessories fixing material fixing material
929 100
DPA M CAT6 RJ45S 48
929 110
DPA M CAT6 RJ45H 48
DPA M CAT6 RJ45S 48
929 100
Überspannungsableiter DEHNpatchmit Patchkabel und Stewart-Stecker
DPA M CAT6 RJ45H 48
929 110
Überspannungsableiter DEHNpatchmit Patchkabel und Hirose-Stecker
*) Special lengths on request
Accessory for DEHNpatch
Mounting Set for DEHNpatch
The set comprises a DIN rail for up to 24 DEHNpatch devices and different
distance bolts with sliding nuts for installation into data distributors.
To save space, the DIN rail can be mounted at the distributor panel
or even upstream of the mounting sections in a 19" grid dimension.
Type
MS DPA
Part No. 929 199
Mounting in
19" cabinets
35
60
72
460
490
11.5
45
57
6.5
M6
20
32
27
7.5
M6
SW10
929 199
MS DPA
MS DPA
929 199
Montageset mit Hutschiene undStockschrauben für bis zu 24 DEHNpatch
256 www.dehn.de