IntelÃ‚Â® Trace Analyzer User's Reference Guide

More documents

Recommendations

Info

Intel® Trace Analyzer User's Reference Guide Figure 3.3. The Navigate Menu • Back (B): Pops the current interval from the zoom stack (the section called “The Zoom Stack”). • Zoom In (I): Magnifies by a factor of two around the current center and pushes this new interval onto the zoom stack (the section called “The Zoom Stack”). • Zoom Out (O): Scales by a factor of 1/2 around the current center and pushes this new interval onto the zoom stack (the section called “The Zoom Stack”). • Reset Zoom (R): Clears the zoom stack and then pushes a time interval onto the zoom stack (the section called “The Zoom Stack”) that corresponds to the complete trace file. • Zoom Up (U): Maintains the current center and goes back to the previous zoom step. • Left 1/1 (Ctrl-Left): Moves one whole screen to the left and pushes the new interval onto the zoom stack (the section called “The Zoom Stack”). • Right 1/1 (Ctrl-Right): Moves one whole screen to the right and pushes the new interval onto the zoom stack (the section called “The Zoom Stack”). • Left 1/2 (Left): Moves half a screen to the left and pushes the new interval onto the zoom stack (the section called “The Zoom Stack”). • Right 1/2 (Right): Moves half a screen to the right and pushes the new interval onto the zoom stack (the section called “The Zoom Stack”). • Left 1/4 (Shift-Left): Document number: 318120-002 16
Intel® Trace Analyzer User's Reference Guide Moves a quarter of a screen to the left and pushes the new interval onto the zoom stack (the section called “The Zoom Stack”). • Right 1/4 (Shift-Right): Moves a quarter of a screen to the right and pushes the new interval onto the zoom stack (the section called “The Zoom Stack”). • To Start (Home): Moves to the start of the trace file and pushes the new interval onto the zoom stack. (the section called “The Zoom Stack”) • To End (End): Moves to the end of the trace file and pushes the new interval onto the zoom stack (the section called “The Zoom Stack”). • Goto (G): Opens the Time Interval Selection dialog box (the section called “Time Interval Selection”). The Advanced Menu Figure 3.4. The Advanced Menu • Tagging Tagging highlights events that satisfy specific user-defined conditions. Click on this entry to open the dialog box where the tagging conditions are specified. For more information on the Tagging dialog box. refer to the section called “The Tagging Dialog”. • Filtering Filtering shows only those events that satisfy a condition as defined by the user. All other events are suppressed as if they had never been written to the trace file. The filtering dialog box is explained in the section called “The Filtering Dialog”. • Reset Tagging/Filtering This menu entry is active only when the chart has been either filtered or tagged. It undoes the tagging/filtering. All events are shown and none are filtered or tagged. • Process Aggregation Document number: 318120-002 17
Page 1 and 2: Intel® Trace Analyzer User's Refer
Page 23: Intel® Trace Analyzer User's Refer
Page 75 and 76:
Intel® Trace Analyzer User's Refer
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113:
show all

IntelÃ‚Â® Trace Analyzer User's Reference Guide

Create successful ePaper yourself

Delete template?

Save as template?