SK-NET™ Operating & Installation Guide - Secura Key
SK-NET™ Operating & Installation Guide - Secura Key
SK-NET™ Operating & Installation Guide - Secura Key
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>SK</strong>-NET<br />
<strong>Operating</strong> & <strong>Installation</strong> <strong>Guide</strong><br />
5.8 Timed Antipassback<br />
To set the timed antipassback time for all readers:<br />
1. Right click on a Connection Group.<br />
2. Select Properties.<br />
3. Click on the Configuration tab.<br />
4. Enter the number of TAPB minutes (up to 30).<br />
5. Make sure the Latch Time is correct. Click on Send.<br />
To set the timed antipassback time for a single reader:<br />
1. Right click on the reader name.<br />
2. Select Properties.<br />
3. Click on the Edit button.<br />
4. Enter the number of TAPB minutes up to 30 minutes).<br />
Click on Send.<br />
NOTE: Time Zones 0 and 1 cannot have any type of<br />
antipassback.<br />
NOTE: To complete Timed Antipassback programming, you must<br />
create an Access Group using a Time Zones in the range 2 through 15<br />
(See Section 5.14).<br />
<strong>Secura</strong> <strong>Key</strong> • 16
Change language