SK-NET™ Operating & Installation Guide - Secura Key

SK-NET
Operating & Installation Guide
5.21 Changing the latch timer for a single reader
1. Right-click on the name of the reader you want to change.
2. Select Properties.
3. Click on the Edit button.
4. Enter a new Latch Timer value (in seconds).
5. Click on the Send button.
6. Click on Close.
5.22 Date and time
By default, every time you log into a location with your computer, the
time and date in that computer can be transmitted to the system. If
you prefer, you may manually set the system time using SK-NET. (For
example, if the computer is in a different time zone, you will want to set
the time manually.)
Automatic Daylight Savings Time adjustments are handled by the system,
unless you override this feature.
Secura Key • 27