INtime® 3.1 Software - tenAsys

INtime 3.1 Software
Do a quick check
Many problems are solved by correcting these:
• Is the RT kernel running You must start the RT kernel prior to starting most
INtime development tools and all INtime applications.
• Did you use the INtime RT Application wizard to set up the project Using this
wizard automatically starts an INtime project and ensures that the project includes
proper settings.
Look for symptoms
Scan the Symptom table until you find a symptom that your system exhibits. The
Symptom table lists solution codes in the order most likely to occur.
Locate the corresponding solution codes in the Solution table and take the
recommended action. You may need to try several solutions before you successfully
resolve the problem.
Table G-1. Symptom table
Solution
Symptom
codes
INtime software does not install. 1, 2, 3,
4, 5, 6
Tools in the INtime development environment do not run. 11
The INtime application reports build errors. 9, 10
A serial mouse does not respond after you start the RT kernel. 12
The INtime application does not load. 11, 13
The file is not recognized as a valid INtime application. 14
The INtime application terminates unexpectedly. 15
The INtime application displays this message:
15
Running out of Virtual Address Space (error code 0xf0)
The INtime application reports an unsupported C library function. 10
The INtime application performs terminal I/O, and no terminal window appears. 17
Only a blue screen displays. 20
Windows window events and applications respond slowly. 19, 16
The system doesn’t respond to attempts to move the cursor or make entries from
the keyboard.
You’re running SDM and neither the system console nor the SDM terminal respond to
attempts to move the cursor or make entries from the keyboard.
18, 20,
19, 16,
8
7
180