ZM-71SE About version 1.2.1.0 - Soliton

About Alarm Display (ZM function)
The following two funcions is added.
1Selecting or deselecting of message storage in memory for each bit.
Whether or not to store messages to be displayed as alarms can be set, depending on
the importance.
[Ex.]
Line 1 stop bit
OFF
Line 1 maintenance bit
OFF
When storage in memory is set for the line 1 stop
and line 1 maintenance bits:
Line 1 stop 15 : 42 : 20 15 : 43 : 50
Line 1 maintenance 15 : 43 : 59 15 : 44 : 10
Line 1 stop 15 : 44 : 20 15 : 45 : 50
Line 1 maintenance 15 : 46 : 00 15 : 46 : 20
Line 1 stop 15 : 46 : 30 15 : 47 : 20
When storage in memory is not set for the line 1 maintenance bit,
the history records of the bit are not stored.
Then the following display is not given.
Occurrence time
Reset time
Line 1 stop 15 : 42 : 20 15 : 43 : 50
Line 1 stop 15 : 44 : 20 15 : 45 : 50
Line 1 stop 15 : 46 : 30 15 : 47 : 20
Setting procedure
In the [Message Edit] window, choose [Display Change] from the [Display] menu. The
display changes as follows.
When setting [No.], [Relay No.], or [Memorize] to
be displayed or not to be displayed, choose the
required item of [No.], [Relay No.] or [Memorize]
from the [Display] menu (refer to the figure on the
right).
2Display of alarm occurrence times
Alarm occurrence times can be displayed with alarm messages.
Alarm occurrence time
Alarm occurrence time
Alarm occurrence time
Line 1 stop bit
OFF
Line 1 maintenance bit
OFF
Alarm occurrence time
Alarm occurrence time
Alarm occurrence time
Line 1 stop bit 0 : 1 : 30
Line 1 maintenance bit 0 : 0 : 11
Line 1 stop bit 0 : 1 : 30
Line 1 maintenance bit 0 : 0 : 20
Line 1 stop bit 0 : 0 : 50