ZM-71SE About version 1.2.1.0 - Soliton

[3] Trend Sampling (corresponds to page 12-14)
[Trend Sampling] Dialog
[Setting 3] Tab Window
Add the drawing subsidiary lines (maximum 4 lines).
Upper Line2
Upper Line
Lower Line
Lower Line2
[Upper Line2 Display] [Lower Line2 Display]
These are the same as [Upper Line Display] and [Lower Line Display] in the [Setting 2] tab
window.
[Upper Value2] [Lower Value2]
These are the same as [Upper Value] and [Lower Value] in the [Setting 2] tab window.
[Data Length], [Graph Max.] and [Graph Min.] are the common setting with the [Setting 2] tab
window.
(corresponds to page 12-43)
*Real-time
printing function
is not available
for ZM70.
Real-time Printing of Bit Sampling
When printing out the sampling data by the bit sampling, in this version, it is possible to
execute real-time printing every time when the bit sampling is executed, in addition to
the way to print out the sampling data at one time. The sampling messages are
continuously printed out.
Setting procedure
Set in [Main 2] menu of [Bit Sampling] dialog.
[ Real Time Print]
When checking this item, only the changing messages are printed out at every change of bits.
The related setting items are as follows;
[ Time Display]
The time data can not be printed out if not checking this item. If checking it, the messages
with the time data can be printed out.
[Initial Status Display] (ON-OFF/ON/OFF)
This setting decides which bits give the order for real-time printing.
When selecting [ON-OFF], the order is given whenever any bit changes from ON to OFF, or
from OFF to ON.
When selecting [ON], only the [ON] bit gives the order. Also, when selecting [OFF], only
the [OFF] bit gives the order.
* The displaying status is not related to the order for real-time printing.