ZM-71SE About version 1.2.1.0 - Soliton

Press the [Cassette Adjustment] switch.
This switch is valid for the FONT version 1.100/1.090/1.000 or greater.
2Press the [Cassette Adjustment] switch.
The [Cassette Adjustment] screen is displayed.
3Press the [Format] switch and then the [Execute] switch.
The cassette is formatted according to the current screen data. The [Main Menu] screen
is displayed again.
Cassette Adjustment
2000-6-26 14:38:51
Main Menu
Date and Time Adjustment
Date:
Time:
+ -
Set
Format of SRAM Cassette
* Formats SRAM cassette in the present screen data type.
Format
Execute
Additional error numbers to be displayed on the ZM
The following new error numbers are provided for check errors.
Check
Data has some error.
Data has some error.
Error:160 (24 : )
Error:160 (24 : )
Error No.
Item No.
Item number
24: SRAM cassette
Error number (Refer to the following table.)
ZM80 ZM70 Error No. Contents Remedies
160
There is an error in the [SRAM
Cassette Setting] dialog.
(The total words exceed 256k words.)
Reduce the total number of words
to 256k or less in the dialog.
161
The SRAM cassette data is
destroyed.
Check the battery for voltage
drop and contact our technical
support department.
162
The SRAM cassette data does not
match the ZM program version.
Check both versions and contact
our technical support department.
163
The setting in the [SRAM Cassette
Setting] dialog does not match the
SRAM cassette format.
Check the [SRAM Cassette
Setting] data and execute
formatting of the SRAM cassette.
205
The [SRAM Cassette Setting] dialog
has been set, but no SRAM cassette
is attached.
Attach an SRAM cassette.