ZM-71SE About version 1.2.1.0 - Soliton
ZM-71SE About version 1.2.1.0 - Soliton
ZM-71SE About version 1.2.1.0 - Soliton
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
[Display Order]<br />
The meaning of “display order” varies depending on what is selected in [Display Mode].<br />
Chronological Order<br />
When [Occurrence Time], [Cancellation Time], or [Time Lag Display] is selected in<br />
[Display Mode], older errors are displayed at the top and recently occurring errors are<br />
displayed at the bottom.<br />
When [Total Frequency of Occurrence Display] or [Total Time of Occurrence Display] is<br />
selected in [Display Mode], smaller totals are displayed at the top and larger totals are<br />
displayed at the bottom.<br />
Newest Order<br />
When [Occurrence Time], [Cancellation Time], or [Time Lag Display] is selected in<br />
[Display Mode], recently occurring errors are displayed at the top and older errors are<br />
displayed at the bottom.<br />
When [Total Frequency of Occurrence Display] or [Total Time of Occurrence Display] is<br />
selected in [Display Mode], larger totals are displayed at the top and smaller totals are<br />
displayed at the bottom.<br />
[Char. Prop.] tab window<br />
This is the same as relay sampling.<br />
For details, refer to page 12-46 in Instruction Manual.<br />
Display Area Part<br />
This is the same as bit sampling.<br />
For details, refer to page 12-38.<br />
Switches Active in the Alarm Display Mode<br />
Click the [Sample Switch] icon on the alarm display item tool bar. The switch pull down menu is<br />
displayed.<br />
Screen Editing<br />
[Alarm Display] icon<br />
Alarm display item tool bar<br />
[Sample Switch]<br />
[Display Area]<br />
[Detail]<br />
(Alarm Display)<br />
UP<br />
DOWN<br />
+BK<br />
-BK<br />
GR<br />
DISPLAY<br />
CHANGE<br />
RESET<br />
ORDER<br />
DEL<br />
Division No.<br />
Function : Roll Up<br />
Division No.<br />
Function : Roll Down<br />
Division No.<br />
Function : Plus Block<br />
Division No.<br />
Function : Minus Block<br />
Division No.<br />
Function : Graph Return<br />
Division No.<br />
Function : Display Change<br />
Division No.<br />
Function : Reset<br />
Division No.<br />
Function : Display Order Change<br />
Division No.<br />
Function : DEL<br />
[Division No.]<br />
Set the division number to be the same as the division number in the [Alarm Display] dialog.