ZM-71SE About version 1.2.1.0 - Soliton

[Main] Tab Window
[Division No]
Specify the division number where the [Time Display] part is placed.
[Display Mode]
[Calendar Display]
[Convert seconds into hhh:mm:ss] (Refer to "Chapter 12 Sampling" page 29.)
*Select [Calendar Display]. When selecting [Convert seconds into hhh:mm:ss], refer to page
29.
[ Use System Calendar]
When checking this box:
This item can be used as a calendar display.
It is possible to select the display type, and change the character size easily.
When unchecking this box:
The user can set the format of the time display.
About the [Time Display Format], refer to page 51.
[Memory]
This setting is available when unchecking [Use System Calendar].
The PLC data is stored in this address based on the [Time Display Format] setting (page 51).
[Calendar Condition] [Date Display] [Time Display]
Set the display condition for each of these items.
* [Day of the week] cannot be displayed. To display it, use the [Calendar Display].
[Process Cycle]
For information on the processing cycle, refer to page 3-9 in Chapter 3, "Screen."
[Char. Prop.] Tab Window
[Char. Type]
Normal Displays the character as the size specified by [Char. Size].
Bold Displays as the bold typeface (available only when both X and Y is [1]).
[ Italic]
Check when the character is to be italic.