Cleaner Technology Transfer to the Polish Textile ... - Miljøstyrelsen

More documents

Recommendations

Info

Topic 28. Neutralization after dyeing Case illustration: Use only neutralization after reactive dyeing of cotton when needed Concept After dyeing in the alkaline range, it is normal to neutralize. Typically, acetic acid is used giving a contribution to COD in the waste-water. Acid is added to assure that dyes are not washed out from fibres, e.g. in the first rinse after dyeing with certain reactive dyes. However, often there seems to be no need for this acid addition. Alternatively, formic acid – or an even better mineral acid like diluted hydrochloric acid – could be used giving a smaller or no contribution of COD. This is documented in detail in a paper in Part 3. Improvement potentials Chemical savings. Reduction of COD load. Relevance Most companies. 46
Topic 29. Dry conditioning Case illustration: Dry conditioning of yarn Concept In yarn dyeing companies, avivation – supplying of lubricants to the yarn – is often done in one of the rinses after dyeing. It should be assessed if conditioning alternatively could be done in connection with winding, as it is seen when paraffin is applied to certain types of yarn. One should also take into account possible impacts on the working environment when conditioning is done in a dry state. Improvement potentials Chemical savings. Reduction of environmental impacts. Relevance Yarn dyeing companies. 47
Page 1 and 2: 1999 Cleaner Technology Transfer to
Page 3: Content Preface 5 Summary 7 Part 1.
Page 7: Summary Areas of pollution preventi
Page 11 and 12: 1.1 Programme description Programme
Page 13: Focus on cost-effective options par
Page 17 and 18: 2.1 Introduction This Idea catalogu
Page 19 and 20: Topic 1. Minimization in consumptio
Page 21 and 22: Topic 3. Optimization of cooling by
Page 23 and 24: Topic 5. Temperature control of coo
Page 25 and 26: Topic 7. Minimization of water for
Page 27 and 28: Topic 9. Exchange of batch dyeing m
Page 29 and 30: Topic 11. Introduction of in situ r
Page 31 and 32: Topic 13. Optimization of counter c
Page 33 and 34: Topic 15. Procedure for cleaning of
Page 35 and 36: Topic 17. Change from batch to cont
Page 37 and 38: Topic 19. Desizing with enzymes Cas
Page 39 and 40: Topic 21. Substitution of APEO dete
Page 41 and 42: Topic 23. Change from monoreactive
Page 43 and 44: Topic 25. Substitution of carriers
Page 45: Topic 27. Substitution of afterchro
Page 49 and 50: Topic 31. Mechanical softening proc
Page 51 and 52: Topic 33. Re-use of pure cooling wa
Page 53 and 54: Topic 35. Re-use of chemically load
Page 55 and 56: Topic 37. Re-use of water from rins
Page 57 and 58: Topic 39. Separation techniques for
Page 59: Topic 41. Evaporation and reclamati
Page 63 and 64: 3.1 Introduction During the Cleaner
Page 65 and 66: The ever increasing demand to shade
Page 67 and 68: The dyeing process The reactive dye
Page 69 and 70: hardness in water and extract from
Page 71 and 72: Figure 7. The effect of complexing
Page 73 and 74: Reduced process time Seilund and C.
Page 75 and 76: Tabel 1. Degradation af APEO. Table
Page 77 and 78: Alkylphenol ethoxylates (APEO) This
Page 79 and 80: 3.4 Reclamation and re-use of proce
Page 81 and 82: Figure 1. Typical process waters fr
Page 83 and 84: Figure 2. The dependency of precipi
Page 85 and 86: Advantages and limitations of the w
Page 87 and 88: Figure 5. Environmental benefits of
Page 89 and 90: Kolb, M., B. Funke, H.P. Gerber and
Page 91 and 92: Figure 3. Typical process water fro
Page 93 and 94: Table 1. Selected chemical for delc
Page 95 and 96: Figure 9. Profiles for dye-stuff pr
Page 97 and 98:
Conclusions The optimal use of chem
Page 99 and 100:
The conclusion based on lab-scale r
Page 101 and 102:
During the period from 1992 to 1995
Page 103 and 104:
3.8 Environmental labelling John Ha
Page 105 and 106:
The products to be labelled with th
Page 107 and 108:
3.9 Improvement of the rinsing effi
Page 109 and 110:
Table 1. Documentation of savings i
Page 111 and 112:
Part 4. Implementation projects 111
Page 113 and 114:
4.1 Introduction On the basis of th
Page 115 and 116:
and a continued pumping is achieved
Page 117 and 118:
The new recipes were tested in a la
Page 119 and 120:
4.4 Savings and substitution of env
Page 121 and 122:
To illustrate the order of magnitud
Page 123 and 124:
Data sheet Publisher: Ministry of E
show all

Cleaner Technology Transfer to the Polish Textile ... - Miljøstyrelsen

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?