Coral SeaBeam Softphone User Guide (for Coral ... - Tadiran Telecom

Appendix B - TonesTones are audible signals that provide information about the status of calls and features. How the available tones areused varies from system to system according to installation and subsequent settings. In order to familiarize yourselfwith the tones used in your system, try accessing various features and listen to the tones that are used.The mostfrequently heard tones are::Break-In/Break-Out Tone Warning tone received by a station user indicating that a third party has broken into oris leaving (breaking out) an existing conversation.Break-In Warning ToneBusy (Engaged) ToneCall Waiting ToneConfirmation ToneOutside Dial ToneReorder ToneRingback ToneSecond Ringback ToneBackground tone heard during the entire break-in period. Indicates that a third party islistening. (Not used in North America.)When the destination you have dialed (extension or trunk) is busy.A tone heard while engaged on a call indicating that another call is waiting to beanswered.A tone heard when you have successfully accessed or activated a feature (for exampleCamp-On, or Call Forward).A tone heard when you are connected to an outside line.A tone heard when you try to access a denied feature or attempt an illegal action, or:• You have stayed off-hook for too long before dialing or dial completion.• The station that you called does not answer in time. On-hook and call again later.• The handset is not correctly on-hooked. Replace handset on the cradle, or:• The station that you called is in Do Not Disturb mode.A tone heard when the destination you have dialed is ringing.Indicates that the destination you have dialed is busy, and your call is waiting to beanswered.Appendix B - Tones B-1 Coral SeaBeam User Guide (Coral Sea Softswitch)