Coral SeaBeam Softphone User Guide (for Coral ... - Tadiran Telecom

Mobility: Call-through, CallbackOptions available while in an established Mobility callDuring a mobility call, a touch-tone based interactive subscriber’s menu allows you to activate the following basic callfeatures by pressing keys on the phone dial pad:To Dial DescriptionPlace a new callDTMF tones ignoredby Sea SoftswitchTransfer call to yourdesk phone172Listen for a dial tone indicating that you can place a call to a new contact. Your original conversing partyis disconnected. Dialing 1 allows you to continue using the Mobility service without redialing theMobility number for a number of sequential calls. If you exceed the number of allowed sequential calls,you will hear an announcement indicating that you cannot place the call.Note: Instead of dialing 1, you can also wait for the other party to hang up first.Changes the DTMF to transparent mode, allowing you to dial to voicemail, answering machines, andany other service outside the Sea Softswitch system requiring DTMF tones.Note: Once you change the DTMF mode, you will not be able to use the other options in this table forthe current call.A dial tone prompts you to enter your desk phone number (your internal device, as defined in your userprofile). You are disconnected and the conversing party is transferred to your desk phone.Note: Your desk phone number is not displayed on the transferred party’s display.Mobility: Call-through, Callback 84 Coral SeaBeam User Guide (Coral Sea Softswitch)