Coral SeaBeam Softphone User Guide (for Coral ... - Tadiran Telecom

Mobility: Call-through, CallbackTo place a Call-through Mobility call from an off-site phone:1. Place a call to your dedicated Mobility number. Note: If your ANI number is not recognized or you do not have a PIN code defined in the system you will hear anannouncement indicating that you are not authorized to use this Mobility service.2. Listen for dial tone.3. Dial your PIN code (if required by your authentication rules or if your phone does not present your ANI number). Note: If you enter an invalid PIN code you will hear an announcement to enter the correct PIN code. If you are not surewhat your PIN code is, contact your system administrator.4. Press #, and then listen for the dial tone.5. Place a call to the required destination number.Notes: 1) If your destination is an external number, it should be preceded by an external line access code.2) Depending on your settings, your off-site phone ANI or alias is displayed to the party receiving the call.6. Listen for the ringback tone.7. Wait for an answer.8. Once in an established Call-through call, you can activate one of the options described in the table on page 84.Mobility: Call-through, Callback 82 Coral SeaBeam User Guide (Coral Sea Softswitch)