Coral SeaBeam Softphone User Guide (for Coral ... - Tadiran Telecom

Right-clickingWhich Account is UsedTable 19: Phone Dialing MethodsDialing Method Procedure CommentsRight-click an entry on the Contacts tab or any list in theCalls tab, and select Call. You can also double-click an entry;the call is automatically placed.• If the contacts list contains many contacts,use the field to filter the list.• To learn more about the Calls & Contactsdrawer, see page 17.Redialing Redial the last number. See Last Number Redial on page 78If you have more than one account enabled, the account that is used for the call depends on the following:• If you enter the account prefix before the number (for example, #1) then that account is used.• Otherwise, the rules of the dial plan determine which account is used. If you have not modified the dial plan, the dialplan will always select the default account.The outgoing call might be encrypted, depending on your security settings. For information about the current securitysettings, contact your system administrator.• If an encrypted call is established, the icon appears on the Call Display. This icon indicates that the call is guaranteedto be secure between you and your proxy, and might or might not be secure beyond that first hop. See your systemadministrator for more details about how encryption works.• If an unencrypted call is established, the unencrypted icon appears.• If the call cannot be established with the specified security, the call will fail.Response messages during calling statesDuring and after you place a call, you may be offered any one of the following relevant display messages options. Thesemessages are listed in Table 20. The response messages indicate the current condition of this request. The status codeOperating the softphone 43 Coral SeaBeam User Guide (Coral Sea Softswitch)Making Calls