Coral SeaBeam Softphone User Guide (for Coral ... - Tadiran Telecom

Mobility: Call-through, CallbackThe Mobility feature allows you to connect off-site phones, such as your home or mobile phone, to the Sea Softswitch via adedicated Mobility number. Once connected, you can make calls from within the system and activate Sea Softswitchfeatures (see table on page 84). The off-site phone operates as a virtual station in the Sea Softswitch.Mobility services are based on your dedicated alais numbers, call access parameters, rules and announcements managedby your system administrator via the Sea Softswitch portal.An authentication process is employed based on a combination of your off-site caller ID (ANI) number, dedicatedsystem-wide Mobility number, and your PIN code.There are two types of mobility services – Call-through and Callback. You can be provided with both services on thesame off-site phone if your system administrator has assigned separate dedicated Mobility numbers for each service:• Call-through—you call a dedicated Mobility number and receive a dial tone after successfully passing theauthentication process. The off-site phone must provide an ANI number or you must enter a valid PIN code (ifprompted).• Callback—you call a dedicated Mobility number. The Sea Softswitch identifies you, disconnects the call, and calls youback at a predefined callback number. Upon answering the call, you receive a dial tone.Use the table below to record your Mobility numbers:Call-throughCallbackMobility NumberMobility: Call-through, Callback 81 Coral SeaBeam User Guide (Coral Sea Softswitch)