Coral SeaBeam Softphone User Guide (for Coral ... - Tadiran Telecom
Coral SeaBeam Softphone User Guide (for Coral ... - Tadiran Telecom
Coral SeaBeam Softphone User Guide (for Coral ... - Tadiran Telecom
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Mobility: Call-through, CallbackTo place a Callback Mobility call from an off-site phone:1. Place a call to your dedicated Mobility number.2. Listen <strong>for</strong> dial tone if your authentication rule requires a PIN code; otherwise, wait <strong>for</strong> ringback tone and proceed toStep 5.3. Dial your PIN code. Note: If you enter an invalid PIN code you will hear an announcement to enter the correct PIN code. If you are not surewhat your PIN code is, contact your system administrator.4. Press #. The call is disconnected.5. Wait <strong>for</strong> the system to call you back. Note: You can receive another call be<strong>for</strong>e the system calls you back; in this case, the system will continually attempt toestablish the Callback call according to a pre-defined Reattempt rule.6. Answer the call from your Callback phone, as defined by your system administrator.7. Listen <strong>for</strong> the distinctive dial tone.8. Place a call to the required destination number.Notes: 1) If your destination is an external number, it should be preceded by an external line access code.2) Depending on your settings, your off-site phone ANI or alias is displayed to the party receiving the call.9. Listen <strong>for</strong> the ringback tone.10. Wait <strong>for</strong> an answer.11. Once in an established Callback call, you can activate one of the options described in the table on page 84.Mobility: Call-through, Callback 83 <strong>Coral</strong> <strong>SeaBeam</strong> <strong>User</strong> <strong>Guide</strong> (<strong>Coral</strong> Sea Softswitch)