Coral SeaBeam Softphone User Guide (for Coral ... - Tadiran Telecom

Conference: Method 1CONF (AA off and AC off)You can host a conference by calling the other parties involved, or by allowing them to arrange the call themselves.Note: When using this method, ensure that the and buttons are turned off. While the conference call is inprogress, you can change to any of the other methods (see page 70 and page 71) by enabling the requiredcombination of AA and AC. Coral SeaBeam will start handling the conference in the relevant way.To establish a conference using method 1:1. With one active call on one of the lines, place the call on hold by either:• selecting another line and dialing a third party• accepting an incoming call2. Click to conference all calls. All lines will be part of the conference – both the lines on and the line you arespeaking to (if any).3. To suspend the conference, click again to place all other parties on hold. The other participants cannot speak toone another.You can talk privately to one line by clicking the relevant line.If another call comes in while the conference is on hold, you can choose to answer this line. If you then clickagain, all lines (including the new line) will be added to the conference.4. Click again to restart the conference call. Note: You can be the host even if you did not initiate the call to the first person. For example, one person can call you,then you can place and accept other calls, and establish the conference.To add a party to an active conference:1. Click to place the conference on hold.2. Invite another party to the conference by either:Conference Calls 68 Coral SeaBeam User Guide (Coral Sea Softswitch)Method 1