PIC16F84A 18-pin Enhanced Flash/EEPROM 8-Bit MCU Data Sheet

PIC16F84A9.5.2 TIMING CONDITIONSThe temperature and voltages specified in Table 9-2apply to all timing specifications unless otherwisenoted. All timings are measure between high and lowmeasurement points as indicated in Figure 9-1.Figure 9-2 specifies the load conditions for the timingspecifications.TABLE 9-2TEMPERATURE AND VOLTAGE SPECIFICATIONS - ACAC CHARACTERISTICSStandard Operating Conditions (unless otherwise stated)Operating temperature 0˚C ≤ TA ≤ +70˚C for commercial-40˚C ≤ TA ≤ +85˚C for industrialOperating voltage VDD range as described in DC spec Section 9.1 and Section 9.2FIGURE 9-1:PARAMETER MEASUREMENT INFORMATION0.7 VDD XTAL0.8 VDD RC (High)0.3 VDD XTAL0.15 VDD RC(Low)0.9 VDD (High)0.1 VDD (Low)OSC1 Measurement PointsI/O Port Measurement PointsFIGURE 9-2:LOAD CONDITIONSLoad Condition 1 Load Condition 2VDD/2PinRLCLPinVSSCLVSSRL = 464ΩCL = 50 pF for all pins except OSC2.15 pF for OSC2 output.DS35007A-page 48 Preliminary © 1998 Microchip Technology Inc.