Army Reserve Design Process & Submittal Requirements Part C ...

Page 18q. Enlarged Furniture Typical Details• The complete SID submittal includes:r. SID Binder Indexs. Statement of Design Objectivet. Selection and sampling of all applied finishes including material, color, textureand patterns necessary to complete the exterior and interior finishes and specialitems.5.1.3.2 Furniture, Fixtures and Equipment (FF&E). Furniture, Fixtures and Equipment(FF&E) includes selecting and developing interior building furnishings for anintegrated visual design theme which reflects the interior atmosphere desired by theU.S. Army Reserve. This information shall be submitted in 3” D-ring binder(s), 8-1/2” x 11” format with only one foldout per page. The maximum foldout width shallbe approximately 25”. Each binder shall be labeled on the outside spine and frontcover with the following information: Project title and number, date, project location,design firm and type of submittal (Interim, Final, etc.). Material and finish samplesshall indicate true pattern, color and texture, labeled with manufacturer, name, modelnumber, and finish schedule tag reference. Each sample board is to be inserted into aclear, heavy-duty page protector that is sturdy enough to keep the pages from tearingout. With each new submittal the Interior Designer of Record shall create new FF&Ebinder(s) to satisfy review comments until the Government approves the completedCID package. At the time of the furniture procurement (approximately six monthsprior to the Furniture BOD), the Interior Designer of Record is required to update theFF&E to correct any deficiencies, errors, or furniture product updates after thetechnical furniture review by Louisville District prior to the actual procurement of thefurniture.5.1.3.3 Structural Interior Design (SID). The Structural Interior Design (SID) includes theselection and sampling of all applied finishes including material, color, texture andpatterns necessary to complete the building’s interior architectural features. Itemsinclude, but are not limited to: wall and floor finish materials, window and doorfinishes, glazing and trim materials, ceiling materials and finishes, millwork materialsand finishes, paint and stain finishes, as well as specialty items. Since exterior colors,materials and finishes influence interior selections, include exterior materials as aseparate section of the SID Items include, but are not limited to, roofing materialsand finishes, gutter and downspout, soffit and fascia panels, brick and mortar,window and door frames, as well as specialty items. This information shall besubmitted in 3” D-ring binder(s), 8-1/2” x 11” format with only one foldout per page.The maximum foldout width shall be approximately 25”. Each binder shall belabeled on the outside spine and front cover with the following information: Projecttitle and number, date, project location, design firm and type of submittal (Interim,Final, etc.). Material and finish samples shall indicate true pattern, color and texture,labeled with manufacturer, name, model number, and finish schedule tag reference.Each sample board is to be inserted into a clear, heavy-duty page protector that issturdy enough to keep the pages from tearing out. With each new submittal theInterior Designer of Record shall create new SID binder(s) to satisfy reviewcomments until the Government approves the completed SID package.1 April 2007 Version Army Reserve DPSR Manual -- Part C