Stratos®Pro A4... PH User Manual

Configuration
Limit Function
Relay 1
5
6
102
1) Press menu key.
2) Select CONF using �� keys, press enter.
3) Select parameter set using �� keys, press
enter.
4) Select REL1/REL2 menu using �� keys,
press enter.
5) All items of this menu group are indicated by
the “RL1:” code.
Press enter to select menu,
edit using arrow keys (see next page).
Confirm (and proceed) using enter.
6) Exit: Press meas key until the [meas] mode
indicator is displayed.
Use of relays
Select process variable
Limit 1 switching characteristics
(function)
Limit 1 contact type
Limit 1 setpoint
Limit 1 hysteresis
Limit 1 delay
5