Stratos®Pro A4... PH User Manual

Introduction
Display
Plain-text messages in a large, backlit LC display allow intuitive
operation. You can specify which values are to be displayed in
standard measuring mode (“Main Display”, see page 40).
Color-coded user interface
The colored display backlighting signals different operating states
(e.g. alarm: red, HOLD mode: orange, see page 41).
Diagnostics functions
“Sensocheck“ automatically monitors the glass and reference
electrodes; and the “Sensoface“ function clearly indicates the sensor
condition, see page 139.
Data logger
The internal logbook (TAN SW-A002) can handle up to 100 entries –
up to 200 with AuditTrail (TAN SW-A003), see page 142.
2 parameter sets A, B
The device provides two parameter sets which can be switched manually
or via a control input for different process adaptations or different
process conditions.
For overview of parameter sets (table for copy), see page 58.
Password protection
Password protection (passcodes) for granting access rights during
operation can be configured, see page 148.
Automatic calibration with Calimatic
You can choose from the most commonly used buffer solutions,
see page 160.
An individual buffer set can also be entered, see page 170.
8