Stratos®Pro A4... PH User Manual

Digital Sensors
Connecting a Digital Sensor
Step Action/Display Remark
Connect sensor
Wait until the
sensor data are
displayed.
Check sensor
data
Go to
measuring
mode
120
MEMO SENS
MEMO SENS
View sensor information
using �� keys,
press enter to confirm.
Before a digital sensor
is connected, the error
message “No sensor“ is
displayed.
The hourglass in the
display blinks.
Display color changes to
green.
Sensoface is friendly
when the sensor data are
okay.
Press meas, info or enter After 60 sec the device
automatically returns to
measuring mode (timeout).
Replacing a Sensor
A sensor should only be replaced during HOLD mode to prevent unintended
reactions of the outputs or contacts. When you first want to
calibrate the new sensor, it can also be replaced in calibration mode.