Stratos®Pro A4... PH User Manual

Configuration
Controller
(For description, see Controller Functions)
Process variable. Controller type. Setpoint.
5
6
110
1) Press menu key.
2) Select CONF using �� keys, press enter.
3) Select parameter set using �� keys, press
enter.
4) Select REL1/REL2 menu using �� keys,
press enter.
5) All items of this menu group are indicated by
the “CTR:” code.
Press enter to select menu,
edit using arrow keys (see next page).
Confirm (and proceed) by pressing enter.
6) Exit: Press meas key until the [meas] mode
indicator is displayed.
Use of relays
Select process variable
Controller type
Pulse length
Pulse frequency
Setpoint
Neutral zone
Controller: P action
Controller: I action
Controller: D action
Behavior during HOLD
5