Stratos®Pro A4... PH User Manual

More documents

Recommendations

Info

Configuration Time and Date Tag Number 116 1) Press any arrow key. 2) Select CONF using �� keys, press enter. 3) Select parameter set A using �� keys, press enter. 4) Select CLOCK or TAG using �� keys, press enter. 5) All items of this menu group are indicated by the “CLK:” or “TAG” code. Press enter to select menu, edit using arrow keys (see next page). Confirm (and proceed) using enter. 6) Exit: Press meas key until the [meas] mode indicator is displayed. Time format Time Day and month Year Tag number 5 enter
Configuration Time and Date Control of the calibration and cleaning cycles is based on the time and date of the integrated real-time clock. In measuring mode the time is shown in the lower display. When using digital sensors, the calibration data is written in the sensor head. In addition, the logbook entries (cf Diagnostics) are provided with a time stamp. Please note: • After prolonged power outage (> 5 days) the time display is replaced by dashes and cannot be used for processing. Enter the correct time. • There is no automatic switchover from winter to summer time! Be sure to manually adjust the time! Tag Number (“ TAG“) You can enter a designation for the point of measurement (tag number) in the lower display line. Up to 32 digits are possible. Pressing meas (repeatedly) in the measuring mode indicates the tag number. Being part of the device configuration, the “TAG“ can be read out via IrDA. A standardized tag number helps, for example, to correctly re-install a device after repair. 5 Menu item Tag number Action Choices Select character using �� keys, select next digit using �� keys. Press enter to confirm. A...Z, 0...9, – + < > ? / @ The first 10 characters are seen in the display without scrolling. 117
Page 1 and 2:
Stratos®Pro A4... PH User Manual L
Page 3 and 4:
Specific Test Report CD-ROM Complet
Page 5 and 6:
Contents Configuration ............
Page 7 and 8:
Introduction Intended Use Stratos P
Page 9 and 10:
Control inputs 5 6 11 12 13 Current
Page 11 and 12:
Typical Application of Stratos Pro
Page 13 and 14:
Safety Information Safety Precautio
Page 15 and 16:
Package Contents Check the shipment
Page 17 and 18:
Pipe Mounting, Protective Hood ø40
Page 19 and 20:
Installation Installation Instructi
Page 21 and 22:
1 22 Power Supply, Signal Lines Con
Page 23 and 24:
Example 1: Measuring task: pH, temp
Page 25 and 26:
Example 3: Measuring task: pH, temp
Page 27 and 28:
meas. el ref. el. SG +3 V -3 V A B
Page 29 and 30:
Wiring Examples Example 7: Caution!
Page 31 and 32:
1 2 3 4 Wiring Examples Example 9:
Page 33 and 34:
Example 11: Memosens RS 485 (A) RS
Page 35 and 36:
Protective Wiring of Relay Contacts
Page 37 and 38:
23 1 2 3 4 5 6 7 8 9 10 11 22 21 1
Page 39 and 40:
Selecting the Mode / Entering Value
Page 41 and 42:
Color-Coded User Interface The colo
Page 43:
� � � � � Meas. mode (mai
Page 46 and 47:
Alarm External activation of HOLD T
Page 48 and 49:
Configuration The configuration ste
Page 50 and 51:
Configuration Parameter Set A/B Man
Page 52 and 53:
Configuration Configuration Select
Page 54 and 55:
Configuration Configuration Select
Page 56 and 57:
Configuration Configuration Choices
Page 58 and 59:
Parameter Sets (Original for Copy)
Page 60 and 61:
Parameter Sets (Original for Copy)
Page 62 and 63:
Configuration Sensor Select: sensor
Page 64 and 65:
Configuration Sensor Select: temp d
Page 66 and 67: Configuration Sensor Adjust: Cal ti
Page 68 and 69: Configuration ISM Sensor Adaptive c
Page 70 and 71: Configuration ISM Sensor Adaptive M
Page 72 and 73: Configuration Standard and ISFET Se
Page 74 and 75: Configuration ISM Sensor Adjust: CI
Page 76 and 77: Configuration ISM Sensor Autoclavin
Page 78 and 79: Configuration Current Output 1 Outp
Page 80 and 81: Configuration Current Output 1 Adju
Page 88 and 89: Configuration Temperature Compensat
Page 90 and 91: Configuration Temperature Compensat
Page 92 and 93: Configuration CONTROL Input Paramet
Page 94 and 95: Configuration CONTROL Input Flow me
Page 96 and 97: Configuration Alarm Settings Alarm
Page 98 and 99: Configuration Alarm Settings CONTRO
Page 100 and 101: Configuration Limit Function Relay
Page 106 and 107: 106
Page 108 and 109: Controller Functions Controller equ
Page 110 and 111: Configuration Controller (For descr
Page 112 and 113: Configuration Controller (For descr
Page 114 and 115: Configuration WASH Contact Control
Page 118 and 119: Digital Sensors Stratos Pro can be
Page 120 and 121: Digital Sensors Connecting a Digita
Page 122 and 123: Calibration Please note: • All ca
Page 124 and 125: Zero adjustment Zero Adjustment (IS
Page 126 and 127: Adjustment (Calimatic) Automatic Ca
Page 128 and 129: Manual Calibration with Buffer Entr
Page 130 and 131: Data Entry of Premeasured Sensors T
Page 132 and 133: Product calibration Product Calibra
Page 134 and 135: ORP (Redox) Calibration The potenti
Page 136 and 137: Temp probe adjustment Temp Probe Ad
Page 138 and 139: Measurement Display Remark With act
Page 140 and 141: Diagnostics Display Menu item Displ
Page 142 and 143: Diagnostics Display Menu item Displ
Page 144 and 145: Service (SERVICE) A Service In the
Page 146 and 147: Service Menu item Remark 146 REL1 R
Page 148 and 149: Service Menu item Remark 148 Assign
Page 150 and 151: 150
Page 152 and 153: Specifications pH/mV input Input fo
Page 154 and 155: Specifications I input (TAN) Curren
Page 156 and 157: Specifications Limit values Rel1/Re
Page 158 and 159: Specifications EMC EN 61326-1 (Gene
Page 160 and 161: 160 -01- Mettler-Toledo (correspond
Page 162 and 163: Buffer Tables -03- Ciba (94) buffer
Page 164 and 165: Buffer Tables -05- NIST standard bu
Page 166 and 167:
166 -07- WTW technical buffers °C
Page 168 and 169:
Buffer Tables -09- Reagecon buffers
Page 170 and 171:
-U1- Specifiable Buffer Set You can
Page 172 and 173:
-U1- Specifiable Buffer Set Buffer
Page 174 and 175:
Error Messages Error 174 Info text
Page 176 and 177:
Error Messages Error 176 Info text
Page 178 and 179:
Sensoface Display Problem Status As
Page 180 and 181:
FDA 21 CFR Part 11 Conformity with
Page 182 and 183:
Glossary Calibration Adjustment of
Page 184 and 185:
Glossary pH sensor A pH sensor cons
Page 186 and 187:
Index 21-mA output signal in HOLD m
Page 188 and 189:
Index Configuration: ISM sensor 68
Page 190 and 191:
Index F FACE: Sensoface alert, 22-m
Page 192 and 193:
Index N Neutral zone, controller 10
Page 194 and 195:
Index Reset to factory settings 148
Page 196 and 197:
Index TTM: Configure adaptive maint
Page 198 and 199:
198
Page 200:
Passcodes In the SERVICE - CODES me
show all

Stratos®Pro A4... PH User Manual

Create successful ePaper yourself

Delete template?

Save as template?