Stratos®Pro A4... PH User Manual

Configuration
ISM Sensor
Adaptive Maintenance Timer (TTM)
1
2
3
4
5
6
70
enter
enter
enter
meas
1) Press menu key.
2) Select CONF using �� keys,
press enter.
3) Select parameter set using �� keys,
press enter.
4) Select SENSOR menu using �� keys,
press enter.
5) All items of this menu group are indicated by
the “SNS:” code.
Press enter to select menu,
edit using arrow keys (see next page).
Confirm (and proceed) by pressing enter.
6) Exit: Press meas key until the [meas] mode
indicator is displayed.
Select sensor type
Temperature unit
Temp detection during measurement
(Manual temperature)
Temp detection during calibration
(Manual temperature)
Calibration mode
(AUTO: Buffer set)
ACT - Adaptive calibration timer
TTM - Adaptive maintenance timer
CIP/SIP cycles
Autoclaving counter