Stratos®Pro A4... PH User Manual

Configuration
Parameter set A/B: configurable menu groups
The device provides 2 parameter sets “A“ and “B“. By switching between the parameter
sets you can adapt the device to different measurement situations, for example.
Parameter set “B“ only permits setting of process-related parameters.
Menu group Parameter set A Parameter set B
Sensor selection ---
Current output 1 Current output 1
Current output 2 Current output 2
Compensation Compensation
Control input ---
Alarm mode Alarm mode
Relay outputs Relay outputs
Cleaning ---
Parameter set selection ---
Setting the clock ---
Tag number ---
External switchover of parameter sets A/B
You can switch between parameter sets A and B by applying a signal
to the CONTROL input (parameter setting: ).
Max. 30 V AC/DC
e.g. process control system
Parameter set A active 0...2 V AC/DC
Parameter set B active 10...30 V AC/DC
12
13
input
CONTROL
49