Stratos®Pro A4... PH User Manual

Configuration
Current Output 1
Adjusting the time interval of the output filter
5
6
80
1) Press menu key.
2) Select CONF using �� keys, press enter.
3) Select parameter set using �� keys, press
enter.
4) Select OUT1 menu using �� keys, press
enter.
5) All items of this menu group are indicated by
the “OT1:” code.
Press enter to select menu,
edit using arrow keys (see next page).
Confirm (and proceed) using enter.
6) Exit: Press meas key until the [meas] mode
indicator is displayed.
Current range
Process variable
Current start
Current end
Time averaging filter
Output current for error
message
Output current for Sensoface
Output current during HOLD
Output current for HOLD FIX
5