Stratos®Pro A4... PH User Manual

Configuration
5
Menu item Action Choices
Select function of Select using �� keys. PARSET
CONTROL input Press enter to confirm. (selecting parameter
set A/B via signal at
CONTROL input)
Adjust to flow meter With "Flow" selected,
you must adjust the
device to the flow meter
used.
Enter value using arrow
keys.
Press enter to confirm.
Flow
(for connecting a pulseoutput
flow meter)
12000 pulses/liter
In the alarm menu you can configure flow monitoring. When you have
set CONTROL to FLOW, you can specify 2 additional limit values for
maximum and minimum flow.
If the measured value lies outside this range, an alarm message and a
22-mA error signal (if configured) will be generated.
Display
Flow measurement in measuring mode
Display
Flow measurement (sensor monitor)
95