Stratos®Pro A4... PH User Manual

5
Menu item
Select sensor type
Action Choices
Select type of temp
probe
Select sensor type using
�� keys.
Press enter to confirm.
(not for digital sensors)
Select type of temperature
probe using ��
keys.
Press enter to confirm.
Temperature unit Select °C or °F using ��
keys.
Temp detection
during measurement
Press enter to confirm.
Select mode using ��
keys:
AUTO: Measured by
sensor
MAN: Direct input of
temperature, no measurement
(see next step)
EXT: Temperature specified
via current input
(only if TAN E enabled)
Press enter to confirm.
(Manual temperature) Modify digit using ��
keys,
select next digit using
�� keys.
Press enter to confirm.
Configuration
Digital sensors:
63