FlowCERT (UL)
UL manual - Pulsar Process Measurement
UL manual - Pulsar Process Measurement
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Remote Alarm<br />
When a Modem is connected to, via the RS232 port, (Consult Pulsar or your<br />
local distributor for further details), the following parameters are used to set<br />
up the <strong>FlowCERT</strong> LITE so that when the level reaches a specific alarm<br />
point, as determined by the setting of the relay(s) the unit will dial and<br />
connect to a remote telephone number to provide details of the event.<br />
P144 Call Type<br />
This parameter determines what type of connection is made via the modem.<br />
Option<br />
Description<br />
0= Off (Default) Remote alarm function is disabled<br />
1 = Ring This option initiates a connection to a<br />
remote modem/computer which will then<br />
allow remote communication with the unit.<br />
Please consult Pulsar or your local<br />
distributor for further details.<br />
2= SMS This option initiates a predetermined<br />
message which is sent to the remote<br />
telephone number detailing date and time<br />
the alarm was initiated, the site ID, alarm<br />
condition and level at the time the alarm<br />
was initiated.<br />
P145 Tel. No.1<br />
This parameter is used to enter the number of ‘0’s that appear at the<br />
beginning of the telephone number to be dialled that is to receive the<br />
message.<br />
Option<br />
Description<br />
0= None No ‘0’s present at the beginning of the<br />
telephone number to be dialled.<br />
1 = Add 0 (Default) 1 ‘0’ present at the beginning of the<br />
telephone number to be dialled.<br />
2= Add 00 2 ‘0’s present at the beginning of the<br />
telephone number to be dialled.<br />
Page 122
Change language