FlowCERT (UL)
UL manual - Pulsar Process Measurement
UL manual - Pulsar Process Measurement
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Location<br />
All electronic products are susceptible to electrostatic<br />
shock, so follow proper grounding procedures during<br />
installation.<br />
<strong>FlowCERT</strong> LITE must be mounted in a non-hazardous (safe) area, and the<br />
transducer fitted in the hazardous area.<br />
When choosing a location to mount the enclosure, bear in mind the following:<br />
Ensure that the <strong>FlowCERT</strong> LITE is installed in a “Safe”, nonhazardous,<br />
area.<br />
For a clear view of the LCD display it is recommended that it is<br />
mounted at eye level.<br />
The mounting surface is vibration-free.<br />
FM APPROVED TRANSDUCERS<br />
Class I, Div. 1, Group A, B, C & D<br />
Class II, Div. 1, Group E, F & G<br />
The ambient temperature is between -4 o F and 140 o F (-20ºC and<br />
50ºC).<br />
There should be no high voltage cables or inverters close by.<br />
Page 8