FlowCERT (UL)
UL manual - Pulsar Process Measurement
UL manual - Pulsar Process Measurement
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 6 Parameter Listing and Descriptions<br />
Application Parameters<br />
Operation<br />
P100 Mode of Operation<br />
This parameter sets the mode of operation, when in run mode, and can be set<br />
to one of the following:<br />
Option<br />
Description<br />
1 = Distance (Default) Display shows the distance from the<br />
transducer face to the surface.<br />
2 = Level Display shows how full the vessel is.<br />
3 = Space Display shows how empty a vessel is.<br />
4 = OCM Head Display shows how high the head is.<br />
5 = OCM Flow Display shows the instantaneous flow.<br />
P101 Xducer (Transducer)<br />
This parameter should be set to the transducer being used with the unit, and<br />
can be set to one of the following:<br />
Option<br />
Description<br />
1 = dB3 (Default) Transducer is a dB3. Range 4.921 to 118.116<br />
inches (inclusive of Far End Blanking).<br />
2 = dB6 Transducer is dB6 Range 11.811 to 236.22 inches<br />
3= dB10 Transducer is dB10 Range 11.811 to 393.701 inches<br />
4= dB15 feet Transducer is dB15 Range 19.685 to 590.551 inches<br />
7 = dBS6 Transducer is dBS6 Range 7.874 to 236.22 inches<br />
8 = dBMach3 Transducer is dBMach3 Range 0.0 to 95.472 inches<br />
Page 70<br />
P102 Material<br />
This parameter should be set to the type of material being monitored.<br />
Option<br />
Description<br />
1 = Liquid (Default) Use for liquids and flat solid materials<br />
2 = Solid Solid material that is heaped or at an angle<br />
3 = Closed Tank Use for applications within a closed tank or<br />
where a secondary echo response may<br />
become focussed to create a larger echo<br />
than the first.
Change language