ACTIVITY MONITOR - Vanderbilt Kennedy Center

More documents

Recommendations

Info

MED ASSOCIATES INC. ACTIVITY MONITOR Figure 6-2 - Preferences Screen Next the experiment must be configured. Select Run | Open Experiment | Add New Experiment and select the settings shown in Figure 6-3. Figure 6-3 - Configuration Screen - 42 -
MED ASSOCIATES INC. ACTIVITY MONITOR When the preceding information has been entered, click on the Save As button and save as TEST.CFG 2 Now the following on the screen will appear: Figure 6-4 - Screen that Loads/Starts Experiment Be sure that Start Box is checked and then select the OK button. If everything was done correctly, the screen should now look like this: 2 By saving this file as “TEST.CFG,” the naming of files will remain constant throughout this chapter. When a “standard” experiment is set up, however, it is recommended that it be saved as the default (DEFAULT.CFG). Doing this will ensure that upon opening the Activity Monitor software the experiment that is ready to run is the desired experiment. - 43 -
Page 1 and 2: SOF-811 DOC-038 Rev. 2.3 Copyright
Page 3 and 4: MED ASSOCIATES INC. ACTIVITY MONITO
Page 45: MED ASSOCIATES INC. ACTIVITY MONITO
Page 91: MED ASSOCIATES INC. ACTIVITY MONITO

ACTIVITY MONITOR - Vanderbilt Kennedy Center

Create successful ePaper yourself

Delete template?

Save as template?