YME Engineering Course

J. SEQUENCE CONTROL FUNCTION
Figure: Switch Position Label in Reverse Format
♦ Btn1, Btn2, Button Color
The button color as well as the switch position label can be designated for
some of the SFC blocks, the unit instrument, and the logic operation
blocks. Any of the following 16 colors can be specified for each switch
position label:
R: Red N: Black G: Green Y: Yellow
B: Blue M: Magenta C: Cyan W: White
SB: Steel blue PK: Pink SG: Spring green OR: Orange
YG: Yellow green VO: Violet DB: Deep sky blue GR: Gray
The button color changes when the button (switch) is pressed. In the
Function Block Detail Builder, two colors can be designated for the top
and bottom buttons. For a three-button faceplate, the top two buttons are
defined as [upper] and the bottom button as [lower].
YME Training Center J-19
CS3KR3-ENG 1 ST Edition Jan 2002